How to stop oil gas drilling in your backyard
Oil and gas companies have been busy drilling deep into shale rock in the United States, Canada and Europe.
But if you live in a place with no natural gas, it’s time to get your hands dirty and start digging up some gas.
Take the first step: Gas is a carbon dioxide-heavy greenhouse gas, so it’s good to start with some clean energy sources.
In this case, it means solar, wind and geothermal power.2.
Start small: You’ll want to start small.
A 1,000-square-foot home could make up to 20,000 gallons of water.
That’s just enough to make a single bottle of wine.
But what about a greenhouse gas-intensive industrial facility that uses hundreds of thousands of gallons of gas?
That’s an additional 250 gallons of energy per day, according to the U.S. Energy Information Administration.3.
Keep it small: Small-scale gas extraction can be as simple as a small tank of gas and water.
You could use a small water treatment plant to filter and treat the water, or you could drill your own wells and collect the gas.4.
Start your own drilling rig: Even if you don’t plan to drill in your neighborhood, you could still use a drill rig to collect and process the gas and oil.
That would make up the bulk of the energy for the entire operation.5.
Get out of the way: A good drill rig can also help with the overall energy footprint of a home.
It can be used to scoop up water or to scoop gas out of underground reservoirs.6.
Build your own drill rig: You could build your own water treatment and pumping station to scoop water and gas out.
That could reduce your overall energy use by at least 50% and also cut your overall carbon footprint.7.
Get creative: If you can find a company that’s going to build a drill in-house, you’ll be much better off.
The drilling rig you buy may be more expensive than the one you get from a hardware store, but it could be more efficient than a commercial company.8.
Drill yourself out of a big problem: A company like ExxonMobil can often get away with a huge, costly, costly drilling project because it doesn’t have a deep-water port.
But drill holes that have to go to deep-sea locations might be more economically feasible than deep-seabed drilling.
The U.K. has also invested billions in deep-encrusted boreholes to tap the deep sea, and drilling costs have dropped substantially.9.
Build a well to drill: This might be easier said than done, but a well can be a useful part of your energy system.
Many homes are connected to power grids through pipes that run to the wellhead.
So even if you have no natural water, it might be a good idea to connect a power line to the home to let it know when you need water or gas.10.
Drill the next drill: If a drilling rig can be built, it may be time to start digging for gas.
That might mean starting small and digging your own well to collect gas from underground reservoirs or using a drill to dig your own holes.
If you’re looking for a new energy source for your home, here are the best places to start:The National Resources Defense Council (NRDC), an advocacy group that fights to protect and preserve the natural resources of the United Sates, has compiled an infographic that lays out some of the most important ways to reduce your carbon footprint and keep your energy use under control.